|
| |
 |
| |
| |
 |
 |
 |
| €1900 |
|
Parasound A21 Power amplifier (like new November 2016 unit):
- Output power 8Ω : 2 x 250 W
- Output power 4Ω : 2 x 400 W
- Frequency response : 5Hz - 100kHz (+0/-3dB)
- Slew rate: > 130 V/µsecond
- THD : < 0.2% at full power
- S/N ratio: 112 dB, input shorted, IHF A-weighted
- Damping factor: > 1100 at 20 Hz
- Interchannel crosstalk: > 80 dB at 1 kHz;
> 63 dB at 20 kHz
- Input impedance : 33 kΩ unbalanced; 66 kΩ balanced
- Inputs : 2x RCA unbalanced; 2x XLR balanced
- Outputs :
2x RCA loop Out
- W x H x D: 440 x 180 x 480mm
- Weight: 27kg
|
|
| |
 |
 |
| €990 |
|
MAGNEPAN MG12 Quasi Ribbon Planar-Magnetic floorstand:
- 2-way full range Quasi Ribbon/ Planar-Magnetic Dipole Radiator
Drive Units: 2380 cm2 thin-film planar bass, 96cm long line source quasi ribbon tweeter
- Frequency Response. 45-22kHz (±3dB)
- Rec Power: 100 to 250W @ 8Ω
- Sensitivity 86dB/ 500Hz / 2.83v
- Crossover Frequency: 600Hz (Acoustical)
- Nominal Impedance: 4Ω
- W x H x D: 430 x 1330 x 38mm
- Made in USA
|
|
| |
 |
 |
| €1200 |
|
DYNAUDIO Excite X32 maple wood veneer:
- 2-way bass-reflex system
Drive Units: 2x 5.7" Magnesium Silicate Polymer midbass, 1" soft dome tweeter
- Sensitivity: 86 dB/W/m
- Crossover Frequency: 1.8kHz
- Nominal Impedance: 4Ω
- W x H x D: 170 x 920 x 270mm
- Weight: 17.2kg
- Made in Denmark
|
|
| |
 |
 |
| €790 |
|
Linn Majik 109 walnut wood veneer:
- 3-ways, front bass reflex
- Drive Units: Woofers: 1 × 5" hand-coated paper-cone woofer
Midrange: 1 × 1.2" (30mm) polyurethane elastomer soft-dome
Tweeter: 1 × 0.75" (19mm) fabric-dome supertweeter
- Sensitivity: 88 dB/W/m
- Crossover frequencies: 1.5kHz & 6kHz
- 2K Driver Array: mid & high frequency drive-units are housed in a dedicated cast alloy chassis
- Nominal Impedance: 4Ω
- W x H x D: 192 x 327 x 256mm
- Weight: 5.9kg
- Made in UK
|
|
| |
 |
 |
| €180 |
|
Canton GLE 426 black ash:
- 2-way bass-reflex system
Drive Units:
160mm Aluminum wave surround midbass, 25mm Fabric Dome tweeter
- Sensitivity: 86.5 dB/W/m
- Crossover Frequency: 3.2kHz
- Nominal Impedance: 4...8Ω
- W x H x D: 170 x 295 x 270mm
- Weight: 4.6kg
- Made in Germany
|
|
| |
 |
 |
 |
| €600 |
|
Exposure 3010S CD player:
- Output Level : 2V RMS ref 1KHz 0dB
- Frequency Response : +/- 0.25dB (20Hz - 20 KHz)
- Total Harmonic Distortion : <0.003% ref 1kHz 0dB
- Signal to Noise Ratio : >108dB, A weighted
- Dynamic range : >104dB
- Digital Outputs : SP/DIF Coaxial and Optical
- Twin Burr-Brown PCM 1704 mono 24 true multi-bit DACs fitted to provide very high resolution.
- Highly optimised audio output circuitry with multiple stages of supply regulation.
- Large toroidal power transformer with separate windings for CD transport mechanism and audio stages.
- High capacity supply for audio stages.
- High-stability crystal clock reference and dedicated power supply regulator for the transport and audio stages to ensure low jitter.
- All-aluminium casework and extruded front panel control resonance and stray electro-magnetic fields.
- W x H x D: 440 x 90 x 300mm
- Weight: 5kg
- Made in UK
|
|
| |
 |
 |
 |
| €400 |
|
Musical Fidelity M1 CDT transport:
- Inputs
- 1x XLR AES balanced digital input
- 2x RCA coaxial connector SPDIF
- 1x TOSLINK optical connector
- 1x USB 24bit /192 kbps fully asynchronous type ‘B’ connector
- 2x RCA Phono analogue line-level
- Outputs
- 1x RCA coaxia SPDIF
- 1x Toslink optical SPDIF
- 1x XLR AES/EBU balanced digital
- W x H x D: 220 x 100 x 300mm
- Weight: 3.5kg
|
|
| |
|
| |
|
| |
|
 |
 |
| €400 |
|
Musical Fidelity M1 PWR Power amplifier:
- Output power 8Ω : 2 x 65 W
- Output power 4Ω : 2 x 130 W
- Mono Output power 8Ω : 1 x 100 W
- Mono Output power 4Ω : 1 x 200 W
- THD+N: Stereo <0.03%, Mono <0.02%
- SNR: Stereo >94dB, Mono >100dB
- Frequency Response: 20Hz - 20kHz, <0.5dB
- W x H x D: 220 x 100 x 315mm
- Weight: 3.9kg
|
|
| |
 |
 |
 |
| €390 |
|
Advance Acoustic MAP 305 Integrated amplifier:
- Output power 8Ω : 2 x 100 W
- Output power 4Ω : 2 x 200 W
- Frequency response : 10Hz - 60kHz (+1/-3dB)
- Distortion : < 0,05%
- S/N Ratio : > 100dB
- Channel separation : > 70dB
- Input impedance : 20KΩ
- Phono input impedance : 47kΩ
- Inputs : CD, Tuner, AUX, Phono MM/ MC,
Amp IN
- Outputs :
Pre-Out
- IR Remote control, full aluminium body
- W x H x D: 440 x 155 x 300mm
- Weight: 19kg
|
|
| |
 |
 |
| €400 |
|
Chord Signature Series RCA to RCA interconnects, 1m pair:
- Chord Signature RCA to RCA cables
- 1m pair
- Chord heat shrink
- Made in UK
|
|
| |
 |
 |
| €45 |
|
Real Cable CA1801 Innovation RCA to RCA interconnects, 1m pair:
- Triple shielding
- Time Difference Control
- TwistLock® plugs
- Copper / Silver (OFC / SPC)
- Made in France
|
|
| |
 |
 |
| €150 |
|
Black Rhodium Salsa speaker cables WM Audio BFA terminated, 3m pair:
- Black Rhodium Salsa speaker cables
- 3m pair, terminated
- 19 strands of Silver plated Copper per conductor
- Insulation: Silicone rubber type GPC
- Outside diameter (with braided sleeve): 10 mm
- Inner conductor (audio): 2 x 3,00 mm²
- Braided cable sleeve
- WM Audio BFA connectors (x8)
|
|
| |
|
 |
| €90 |
|
Chord Odyssey 2 speaker cables unterminated, 2.2m pair:
- Chord Odyssey 2 speaker cables
- 2.2m pair, unterminated
- 12 gauge twisted conductors
- 19 strands of Silver plated oxygen free Copper per conductor
- Teflon® insulation
- Silicon jacket
- Made in UK
|
|
| |
 |
 |
| €70 |
|
Sommer Cable Elephant SPM 840 speaker cables unterminated, 2.3m pair:
- Sommer Cable Elephant SPM 840 speaker cables
- 2.3m pair, unterminated
- Loss-free transmission due to the special litz stranding technology
- PVC jacket material
- Outside diameter (with braided sleeve): 20 mm
- Inner conductor (audio): 8 x 4,00 mm²
- Copper strands (audio): 128 x 0.2 mm
- Braided cable sleeve
|
|
| |
 |
 |
| €50 |
|
QED Silver Micro Bi Wire speaker cables unterminated, 2.5m pair:
- QED Silver Micro Bi Wire speaker cables
- 2.5m pair, unterminated
- 4 x 1.25mm2 conductor section
- 99.999% OFC Silver plated individual strands
- careful spacing of the individual conductors
- Low-Density Polyethylene insulation
- low reactive capacitance and inductance across the audio band
|
|
| |
 |
 |
| €190 |
|
Custom Design RS303 loudspeaker stand - Finely crafted and hand-polished loudspeaker stand that not only complements speakers of the highest quality but ensures they perform like they are meant to. The initial mass of the stands is 18kg before filler is used, which really gives you a reassuring idea of their solid build. Once the RS303s are fully mass loaded the total weight is a huge 42kg.
- Top plate: 170 x 190mm
- Base plate: 220 x 260mm
- Height: 610mm
- Precision cut steel
- Base isolation zinc-plated M8 spikes
- Sand filled and heavy
|
|
| |
 |
 |
| €190 |
|
OPERA wood loudspeaker stand - Stiff wood structure stands. The front and back of the wood pillars are real wood veneered and finely polished.
- Top plate: 197 x 238mm (20mm thick)
- Base plate: 300 x 350mm (25mm thick)
- Height: 655mm (spikes included)
- Stiff wood structure
- Front and back wood veneered pillar
- Base spikes included
- Made in Italy
|
|
| |
| |
|
